Precautions must be taken to prevent contact with the skin or the lungs. getting comfortable with the mixing and application of resin and hardener is the key to a successful fiber-glassing project. too much resin and the repair will be mush, but too much hardener and the project is over before it ever begins.. ® fiber hardener 12/18/18 page 3of 5 section 6 – accidental release measures: spill cleanup: clean up using wet methods and a hepa vacuum. clean and rinse floors thoroughly. decontaminate contaminated equipment. prevent the spread of the material and keep dust levels to a minimum. recover and dispose of wastewater.. Hardener with fiber products will not act as a glue, but gain surface strength after firing to 1300 deg. f. 1 quart. fiber mold hardener can be used with all fiber products as a rigidizer; air or oven dry..
The lady there tells me it's not called rigidizer anymore and shows me this stuff called "hotline mild hardener". the catalog description says "used to harden fiber mild constructions. easy to apply and sand to a smooth finish." fiberboard would not brake down like fiber blanket.. Designed to harden fiber paper mold constructions. apply to the fiber mold with a brush and cure at 175 degrees fahrenheit until surface is hard. mold surface can be sanded to a smooth finish. repeat the process, and the mold will be ready for firing to 1. A syringe of "5-minute" epoxy glue, containing separate compartments for the epoxy resin and the hardener. structure of the highly reactive epoxide group present in all epoxy resins. epoxies are also used in producing fiber-reinforced or composite parts..
